1. Go to your phone Menu -> open Web
2. Select Option -> Settings
3. Select your Telco’s GPRS or 3G profile under Default Access point.
4. Once selected, try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup.

Browser setting:

• Go to phone menu ->  Web -> Option -> Select Settings
• Select Cookies. Set to Allow
• Select Load Imgs & Sounds or Show Images -> Select Show Images
• Select Java/ECMA script. Select Enable

1. Go to your phone Menu -> open Web
2. Select Option -> Settings
3. Select your Telco’s GPRS or 3G profile under Default Access point.
4. Once selected, try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup.

Browser setting:

• Go to phone menu ->  Web -> Option -> Settings
• Under General Settings -> Java/ECMA Script. Set to Enable
• Under Page Settings -> Load Images & Sound. Set to Load Images
• Under Privacy settings -> Cookies. Set to Enable

1. Go to phone menu -> Services -> Option -> Setting.
2. Select your Telco’s GPRS or 3G profile under access point.
3. Once selected, try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup.

Browser setting:

• Go to phone menu -> Services -> Option -> Setting
• Select Cookies and set to Allow or Enable
• Select Load Imgs & Sounds -> Select Show Images or Yes
• Select Java/ECMA script. Select Enable

1. Go to phone Menu -> Web -> Options -> Settings -> General.
2. Select your Telco’s GPRS or 3G profile under Access point.
3. Once selected, try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup.

Browser setting:

• Go to phone Menu -> Web -> Options -> Settings
• Select Privacy -> Select Cookies and set to Enable
• Select General -> Select Java/ECMA script and set to Enable
• Select Page -> Select Load Content or Load Images  &  Sounds -> Select Images

1. Go to phone Menu -> Web/Services -> Options -> Settings.
2. Select your Telco’s GPRS or 3G profile under Access point.
3. Once selected, try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup.

Browser setting:

• Go to phone Menu -> Web -> Options -> Settings
• Select Cookies and set to Allow
• Select Load Images  &  Sounds -> Select Images
• Select Java/ECMA script -> Select Enable

Nokia 7900

Nokia 6500
(classic)

Nokia 6500
(slide)

1. Go to phone menu -> Open Settings -> Configuration -> Default config sett.
2. Select your Telco’s GRPS configuration -> Select Option -> Set as default
3. Go to Settings -> Configuration -> Activ.def.in all apps.-> Select Yes
4. Once selected, try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup.

Additional Notes:

If unable to connect to Internet via mobile application (midlet), please follow the following steps:

1. Create an access point.
2. Go to Settings -> Configuration -> Personal config. Settings.
3. Select Option -> Add New. Select "Access point" from the list.
4. Go to Access point settings -> Bearer settings -> Packet data access point.
5. Write the correct access point name here.
1. For Digi, key in diginet
2. For Celcom, key in celcom3g
3. For Maxis, key in net. Enter user name as maxis and password as wap
6. If you want, you can also name this access point, but also the default name "My access point" works well. Do this before returning to the Configuration settings menu.
7. In the Configuration settings menu, select "Preferred access point" and select the access point you just created (in this case "My access point")

Browser setting:

• Go to phone menu ->  Web -> Select Settings
• Select Security Settings -> Select Cookies and set to Allow
• Select Appearance Settings -> Select Show Images -> Set to Yes
• Under Appearance Settings -> Select Javascript and set to Enable
  
  

1. Go to Menu -> Settings -> Connectivity -> Internet settings -> Internet profiles. Then Select your Telco’s GPRS setting profile
2. Go to Menu -> Settings -> Connectivity -> Settings for Java™. Then Select your Telco’s GPRS setting profile.
3. Once selected, try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup.

Browser setting:

• Go to Menu -> Internet. Select More
• Select Options
• Under Browsing option, set Smart-Fit to Off
• Under Browsing option, set Allow Cookies to On
• Under Browsing option, set Show Picture to On
• Once selected, try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup.

1. Go to Menu -> Settings -> Connectivity -> Internet settings.  Then Select your Telco’s GPRS setting profile
2. Once selected, try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup.

Browser setting:

• Go to Menu -> Internet. Select More
• Select Options
• Under Browsing option, set Smart-Fit to Off
• Once selected, try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup.
  
  

1. Go to Menu -> Internet -> Browser settings. Then Select your Telco’s GPRS setting profile
2. The default location of the mobile client is installed under Menu -> My Files -> Games and More. Locate the CIMB Bank application and select Option
3. Under the Option menu, select Settings. Then select your Telco’s GRPS/3G setting profile.
4. Once selected, try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup.

Browser setting:

• The Browser option setting is available when a WAP page is loaded. While on WAP pages, select Options -> Browser options
• Select Cache -> Cache Mode. Select Net first
• Select Cookies -> Cookie Mode. Select Accept all
• Select Preferences. Please enable Javascript and Display Images
  
  

1. Go to Start icon and select Settings
   
2. Select More and then choose Connections
   
3. Select Proxy Connections and Select Menu and choose Add

Enter the fills as follow:

Description: Maxis WAP GPRS
Connects from: The Internet
Connects to: WAP Network
Proxy (name: port): 202.075.133.049:80
Type: WAP
User name: (blank)
Password: (blank)

4. Select Done to save the settings
   
5. Return back to the Connections menu and select GPRS Connections
   
6. Select Menu and Choose Add Enter the fills as follow:

Description: Maxis WAP GPRS
Connects to: The Internet
Access point: unet
Username :maxis
Password: wap
Primary DNS: (blank)
Secondary DNS: (blank)
IP address: (blank)

7. Select Done and Maxis WAP GPRS configuration completed

WAP GPRS CONFIGURATION (CELCOM)

Under Settings :
-> Connections
-> GPRS
Celcom 3G Internet

Connects to : The Internet
Access point : celcom3G
Primary DNS : 0.0.0.0
Secondary DNS : 0.0.0.0

WAP CONFIGURATION (DiGi)

Under Settings :
-> Connections
-> GPRS
Description : DiGi WAP
Connects to : The Internet
Access point : diginet
Primary DNS : 0.0.0.0
Secondary DNS : 0.0.0.0

-> Proxy
Description : DiGi WAP
Connects from : The Internet
Connects to : WAP Network
Proxy (name: port) : 203.92.128.131
Type : WAP
User name : (blank)
Password : (blank)

1. Start > Settings > Connections > Connections > Advanced > Select Networks

• Programs that automatically connect to the Internet should connect using : MAXIS WAP GPRS Settings
• Press Edit
• Modem
  
  
• Go to MAXIS WAP GPRS > Press Edit
• Enter a name for the connection : Maxis WAP GPRS
• Select a modem : Cellular Line (GPRS)
• Press Next
• Access point name : unet
• Press Next
• Press Finish
  
  
• Proxy Settings
  
  
• This network connects to the Internet
  > Tick
• This network uses a proxy server to connect to the Internet > Tick
• Press  Advanced
• HTTP : server : 202.075.133.049 port :80
• WAP : server : 202.075.133.049 port :9201
• Press OK (3X)

2. To launch WAP

• Start > Internet Explorer

WAP CONFIGURATION VIA 3G (CELCOM)

1. Start > Programs > Auto Configuration

• Preferred Network
• Country : Malaysia
• Operator : MY Celcom 3G
  >  Press  OK
• Do you want to do auto configuration now?
  > Press Yes

2. Start > Settings > Connections > Connections > Advanced > Select Networks

• Programs that automatically connect to the Internet should connect using : Celcom 3G WAP Settings
• Press Edit
• Modem
  
  
• Go to Celcom 3G WAP > Press Edit
• Enter a name for the connection : Celcom 3G WAP
• Select a modem : Cellular Line (GPRS)
• Press Next
• Access point name : celcom3g
• Press Next
• Press Finish
  
  
• Proxy Settings
  
  
• This network connects to the Internet
  > Tick
• This network uses a proxy server to connect to the Internet > Tick
• Press  Advanced
• HTTP : server : 10.128.1.242
  port :8080
• WAP : server : 10.128.1.242
  port :9201
• Press OK (3X)

3. To launch WAP

• Start > Internet Explorer

WAP CONFIGURATION (DiGi)

1. Start > Settings > Connections > Connections > Advanced > Select Networks

• Programs that automatically connect to the Internet should connect using : DIGI WAP Settings
• Press Edit
• Modem
  
  
  • Go to DIGI WAP > Press Edit
  • Enter a name for the connection : DIGI WAP
  • Select a modem : Cellular Line (GPRS)
  • Press Next
  • Access point name : diginet
  • Press Next
  • Press Finish
    
    
• Proxy Settings
  
  
  • This network connects to the Internet
    > Tick
  • This network uses a proxy server to connect to the Internet > Tick
  • Press  Advanced
  • HTTP : server : 203.92.128.131
    port :80
  • WAP : server : 203.92.128.131
    port :9201
  • Press OK (3X)

1. Select Browser from the main menu
2. Once the browser is launched, click the menu key. Select Options -> Browser Configuration
3. Under Browser configuration, ensure the following is setup:
   • Browser : Internet Browser or Blackberry Browser
   • Support Javascript : Checked
   • Support HTML tables : Checked
   • Use Foreground and Background Colors: Checked
   • User Background Images: Checked
   • Support Style Sheets: Checked
   • Style sheets media type: Screen
   • Show Images: On WML & HTML Pages
   • Emulation Mode: Blackberry
   • Content Mode: WML & HTML
4. Click Escape keys to return to Browser Options. Select  General Properties
5. Under Default Browser, make sure it is Internet Browser or Blackberry browser
6. Please also ensure the following is setup correctly.
   • Select Options from the main menu
   • Select Advanced Options -> Browser
   • Ensure that the Default browser configuration and Default MDS browser configuration is set to Internet Browser or Blackberry Browser

1. Start > Settings > Connections > Connections > Advanced > Select Networks

• Programs that automatically connect to the Internet should connect using : MAXIS WAP GPRS Settings
• Press Edit
• Modem
  
  
• Go to MAXIS WAP GPRS > Press Edit
• Enter a name for the connection : Maxis WAP GPRS
• Select a modem : Cellular Line (GPRS)
• Press Next
• Access point name : unet
• Press Next
• Press Finish
  
  
• Proxy Settings
  
  
• This network connects to the Internet
  > Tick
• This network uses a proxy server to connect to the Internet > Tick
• Press  Advanced
• HTTP : server : 202.075.133.049
  port :80
• WAP : server : 202.075.133.049
  port :9201
• Press OK (3X)

2. To launch WAP

• Start > Internet Explorer

WAP CONFIGURATION VIA 3G (CELCOM)

1. Start > Programs > Auto Configuration

• Preferred Network
• Country : Malaysia
• Operator : MY Celcom 3G  >  Press  OK
• Do you want to do auto configuration now?
  > Press Yes

2. Start > Settings > Connections > Connections > Advanced > Select Networks

• Programs that automatically connect to the Internet should connect using : Celcom 3G WAP Settings
• Press Edit
• Modem
  
  
• Go to Celcom 3G WAP > Press Edit
• Enter a name for the connection : Celcom 3G WAP
• Select a modem : Cellular Line (GPRS)
• Press Next
• Access point name : celcom3g
• Press Next
• Press Finish
  
  
• Proxy Settings
  
  
• This network connects to the Internet
  > Tick
• This network uses a proxy server to connect to the Internet > Tick
• Press  Advanced
• HTTP : server : 10.128.1.242
  port :8080
• WAP : server : 10.128.1.242
  port :9201
• Press OK (3X)

3. To launch WAP

• Start > Internet Explorer

WAP CONFIGURATION (DiGi)

1. Start > Settings > Connections > Connections > Advanced > Select Networks

• Programs that automatically connect to the Internet should connect using : DIGI WAP Settings
• Press Edit
• Modem
  
  
  • Go to DIGI WAP > Press Edit
  • Enter a name for the connection : DIGI WAP
  • Select a modem : Cellular Line (GPRS)
  • Press Next
  • Access point name : diginet
  • Press Next
  • Press Finish
    
    
• Proxy Settings
  
  
  • This network connects to the Internet
    > Tick
• This network uses a proxy server to connect to the Internet > Tick
• Press  Advanced
• HTTP : server : 203.92.128.131
  port :80
• WAP : server : 203.92.128.131
  port :9201
• Press OK (3X)

1. From the Home Screen, select Start > More > Settings
2. Select Connections >  Proxy
3. Select New.. or Menu > Add
4. In the Description: field, enter a name for the connection : MAXIS WAP GPRS
5. In the Connects from: field, select the type of network from which you will connect : The Internet
6. In the Connects to: field, select the type of network to which you will connect : WAP  Network
7. In the Proxy (name:port): field, enter the proxy server name and port number : 202.075.133.049:80
8. In the Type: field, select the type of proxy connection to be created : WAP
9. Enter details for the following fields:

1. Username : (blank)
2. Password : (blank)

10. Press Done
11. Select Connections >  GPRS
12. Select New.. or Menu > Add
13. In the Description: field, enter a name for the connection : MAXIS WAP GPRS
14. In the Connects to: field, select the type of network to which you will connect : The Internet
15. In the Access Point: field, enter the GPRS APN : unet
16. Enter details for the following fields:

1. Username : maxis
2. Password : wap
3. Authentication Type : (athentication protocol)
4. Primary DNS : (blank)
5. Secondary DNS : (blank)
6. IP Address : (blank)

17. Press Done
18. Try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup

1. From the Home Screen, select Start > More > Settings
2. Select Connections >  Proxy
3. Select New.. or Menu > Add
   1. In the Description: field, enter a name for the connection : Celcom 3G Internet
   2. In the Connects to: field, select the type of network to which you will connect : The Internet
   3. In the Access Point: field, enter the GPRS APN : celcom3g
   4. Enter details for the following fields:
      1. Username : (blank)
      2. Password : (blank)
      3. Authentication Type : (athentication protocol)
      4. Primary DNS : 0.0.0.0
      5. Secondary DNS : 0.0.0.0
      6. IP Address : (blank)
      7. Press Done
4. Try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup

1. From the Home Screen, select Start > More > Settings
2. Select Connections >  Proxy
3. Select New.. or Menu > Add
4. In the Description: field, enter a name for the connection : DiGi WAP
5. In the Connects from: field, select the type of network from which you will connect : The Internet
6. In the Connects to: field, select the type of network to which you will connect : WAP  Network
7. In the Proxy (name:port): field, enter the proxy server name and port number : 203.92.128.131
8. In the Type: field, select the type of proxy connection to be created : WAP
9. Enter details for the following fields:

1. Username : (blank)
2. Password : (blank)

10. Press Done
11. Select Connections >  GPRS
12. Select New.. or Menu > Add
13. In the Description: field, enter a name for the connection : DiGi WAP
14. In the Connects to: field, select the type of network to which you will connect : The Internet
15. In the Access Point: field, enter the GPRS APN : diginet
16. Enter details for the following fields:

1. Username : (blank)
2. Password : (blank)
3. Authentication Type : (athentication protocol)
4. Primary DNS : 0.0.0.0
5. Secondary DNS : 0.0.0.0
6. IP Address : (blank)
   
   
17. Press Done
18. Try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup

1. From the Today screen, tap Start > Programs
2. Tap AutoConfig
3. Select your country in the Country field
4. Select your service provider in the Operator field
5. Tap ok
6. Tap Yes. The configuration is carried out. This may take a few seconds.

For manual settings, please follow the below steps:

Get your phone ready for GPRS/3G connection (Maxis)

1. From the Today screen, tap Start > Settings
2. Tap Connections >  Connections
3. On the Tasks tab, tap Add a new modem connection for MAXIS WAP GPRS

1. Enter a name for the connection :
   Maxis WAP GPRS
   
2. Select a modem :
   Cellular Line (GPRS)
   
   
4. Tap Next
   
   
1. GPRS APN : unet

5. Tap Next > Finish
6. Tap Connections >  Connections
7. On the Tasks tab, tap Setup up my proxy server in the My Work Network section
8. In the Proxy Settings tab, tick the This network connects to the Internet checkbox
9. Proxy Server : 202.075.133.049
10. Tap the Advanced… button

1. HTTP : server : 202.075.133.049
   port :80
2. WAP : server : 202.075.133.049
   port :9201

11. Tap ok
12. Try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup

Get your phone ready for GPRS/3G connection (Celcom)

1. From the Today screen, tap Start > Settings
2. Tap Connections >  Connections
3. On the Tasks tab, tap Add a new modem connection for Celcom 3G WAP

1. Enter a name for the connection : Celcom 3G WAP
2. Select a modem : Cellular Line (GPRS)

4. Tap Next

1. GPRS APN : celcom3g

5. Tap Next > Finish
6. Tap Connections >  Connections
7. On the Tasks tab, tap Setup up my proxy server in the My Work Network section
8. In the Proxy Settings tab, tick the This network connects to the Internet checkbox
9. Proxy Server : 10.128.1.242
10. Tap the Advanced… button

1. HTTP : server : 10.128.1.242 port :8080
2. WAP : server : 10.128.1.242 port :9201

11. Tap ok
12. Try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup

Get your phone ready for GPRS/3G connection (DiGi)

1. From the Today screen, tap Start > Settings
2. Tap Connections >  Connections
3. On the Tasks tab, tap Add a new modem connection for DIGI WAP

1. Enter a name for the connection : DIGI WAP
2. Select a modem : Cellular Line (GPRS)

4. Tap Next

1. GPRS APN : diginet

5. Tap Next > Finish
6. Tap Connections >  Connections
7. On the Tasks tab, tap Setup up my proxy server in the My Work Network section
8. In the Proxy Settings tab, tick the This network connects to the Internet checkbox
9. Proxy Server : 203.92.128.131
10. Tap the Advanced… button

1. HTTP : server : 203.92.128.131 port :80
2. WAP : server : 203.92.128.131 port :9201

11. Tap ok
12. Try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup

1. From the Today screen, taps Start > Settings
2. Tap Connections >  Connections
3. Tap Add a new modem connection for MAXIS WAP GPRS

1. Enter a name for the connection : Maxis WAP GPRS
2. Select a modem : Cellular Line (GPRS)

4. Tap Next
5. Access point name : unet
6. Tap Next > Finish
7. Tap Connections >  Connections
8. Tap Setup up my proxy server in the My Work Network section
9. Tick the This network connects to the Internet checkbox
10. Proxy Server : 202.075.133.049
    
    
    1. Tap the Advanced… button
    2. HTTP : server : 202.075.133.049
       port :80
       
       
11. WAP : server : 202.075.133.049 port :9201
12. Tap ok

Try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup

Get your phone ready for GPRS/3G connection (Celcom)

1. From the Today screen, tap Start > Settings
2. Tap Connections >  Connections
3. Tap Add a new modem connection for Celcom 3G WAP

1. Enter a name for the connection : Celcom 3G WAP
2. Select a modem : Cellular Line (GPRS)

4. Tap Next
   
   
   1. Access point name : celcom3g
      
      
5. Tap Next > Finish
6. Tap Connections >  Connections
7. Tap Setup up my proxy server in the My Work Network section
8. Tick the This network connects to the Internet checkbox
9. Proxy Server : 10.128.1.242
10. Tap the Advanced… button
    
    
    1. HTTP : server : 10.128.1.242
       port :8080
    2. WAP : server : 10.128.1.242
       port :9201
       
       
11. Tap ok
12. Try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup

Get your phone ready for GPRS/3G connection (DiGi)

1. From the Today screen, tap Start > Settings
2. Tap Connections >  Connections
3. Tap Add a new modem connection for DIGI WAP

1. Enter a name for the connection : DIGI WAP
2. Select a modem : Cellular Line (GPRS)

4. Tap Next
   
   
   1. Access point name : diginet
      
      
5. Tap Next > Finish
6. Tap Connections >  Connections
7. Tap Setup up my proxy server in the My Work Network section
8. Tick the This network connects to the Internet checkbox
9. Proxy Server : 203.92.128.131
10. Tap the Advanced… button
    
    
    1. HTTP : server : 203.92.128.131
       port :80
    2. WAP : server : 203.92.128.131
       port :9201
       
11. Tap ok
12. Try to access the Telco homepage or any other website such as www.google.com, to ensure the connection is properly setup